Mobile Gantry Cranes Supplier in Melbourne & Australia

Crane Systems Australia design Cranes for better use of space with our Mobile Gantry Cranes.

Standard steel and hollow profile gantry cranes mounted on swivel wheels, making it possible to lift loads in places where there are no overhead cranes.

MAXIMUM RELIABILITY LIFTING SOLUTIONS

At Cranes Systems Australia we design and manufacture overhead cranes for multiple industries

MOBILE GANTRY CRANES

LIFTING CAPACITY:

0.5T -5 t

CRANE SPAN:UP TO 8 m

Other capacities and spans are available upon request

LIFTING HEIGHT Up to 6 m

CONSTRUCTION•

Mechanically-welded construction,built in three pieces and with wheelsmade of white polyamide.

• Protected with RAL 1028 three-layerpolyurethane paint.

• The PORTC type gantry crane issupplied with a load-carrying trolleyand a power supply line.

• Optionally, they can be supplied withlocking wheels, with swivel wheels,with a different RAL, with powersupply and switch, designed foroutdoor use (only the PORT type),

USAGE Maximum lifting speed of 8 m/min and 10 m/min travel. • PORT type: gantry crane that can be moved with the load as long as the ground is smooth and clear. For both indoor and outdoor use. • PORTC type: gantry that cannot be moved if it is loaded and for indoor use only

ALUMINIUM GANTRY CRANES

ALUMINIUM GANTRY CRANES

LIFTING CAPACITY: 0.25T TO 2T

CRANE SPAN:UP TO 6 m

LIFTING HEIGHT Up to 6 m

Aluminium gantry cranes areIdeal for applications that requirelightness.They are characterised by three features:

• Low weight

• Quick assembly and dismantling

• High mobility

MOTORIZED GANTRY Cranes

MOTORIZED GANTRY CRANES

LIFTING CAPACITY: 1T TO 6.3T

CRANE SPAN: UP TO 10 m

LIFTING HEIGHT Up to 6 m

CraneSystems Australia is proudly Australian owned engineering company specialising in the design, manufacture and supply of overhead cranes, Gantry Cranes, bridge cranes, single girder cranes, double girder cranes, gantry cranes, jib cranes, wire rope hoists, chain hoists, entertainment hoists and manual lifting and material handling products to Victoria, Melbourne, Sydney, South Australia, Adelaide, Western Australia, Perth, Victoria, many other locations across Australia.

Many manufacturers already provide this type of product, but this is distinguished by its ability to move a load of up to 6.3 t by reeling and rotating in all directions directly on the floor thanks to a push-button or radio control.

USAGE Motorised gantry crane for interior and exterior use

• Use on clean and smooth floors

• Assembly using screws and nuts

• 2 non-swivel motorised polyurethane wheels

• Electrical switchgear with independent push-button control (48V control voltage)

• 2 travel speeds, 10 m/min and 20 m/min, with variable speed drive

• Rotation of the gantry by reversal of the motors

• Rotation at low speeds

• Direction reversal from push-button control

• 4 full stop cells

• Protection: 3 coats

• RAL 1028 yellow finish